How to Setup D-Link Dir 890L Wireless Router
They set up and manage your DIR-890L wireless router , you can use the free QRS Mobile app, or you can use the built-in web interface. In order to use all of the functions of this router, you want to register it with mydlink. Simply follow the steps at the top of the Setup Wizard during installation to register your product together with your mydlink account.
NOTE:- After mydlink registration is completed, your router’s default PPPoE, L2TP, PPTP connection are going to be set to Always On. If your ISP charges for usage, you’ll wish to manually choose Dial On Demand as your default setting.
USING THE QRS MOBILE APP:-
Step 1:- Position your DIR-890L near your Internet-connected modem and PC. As well as keep the router in an open area for better wireless coverage.
Step 2:- As well as unplug the modem Ethernet cable connected to your computer and plug it into the port labeled INTERNET on the router. Connect the supplied power adapter to the router and an influence outlet, then verify that the facility LED is on.
Step 3:- Plug one end of the supplied coaxial cable into the port labeled 1 on the rear of the router, and therefore the other end into the Ethernet port on your computer. If you’re fixing the DIR-890L employing a laptop or mobile device, connect it to the Wi-Fi network printed on the included Wi-Fi Configuration Card. Hence you can also find the Wi-Fi network name and password on the label attached to your router.
Step 4:- To configure your DIR-890L, open a browser on the connected computer. If you are not automatically directed to the D-Link Setup Wizard, go to http://dlinkrouter.local./ and follow the onscreen instructions. They use Admin as your username and leave the password blank.
ANTENNA ORIENTATION:-
The DIR-890L is meant to offer you the fastest, most stable network connection possible. In order to maximize performance, orient the antennas at an angle, pointing outward and faraway from the bottom unit.
SETUP AND CONFIGURATION PROBLEMS:-
- HOW DO I CONFIGURE MY DIR-890L ROUTER MANUALLY?
– Connect your PC to the router using a coaxial cable .
– Open a web browser and enter the address http://dlinkrouter.local./ (or 192.168.0.1).
– The default username is Admin. The password should be left blank by default.
– Hence if you have changed the password and cannot remember it, you will need to reset the router to return to an empty password field.
- HOW DO I RESET MY DIR-890L ROUTERS TO FACTORY DEFAULT SETTINGS?
– Ensure the router is powered on. – Press and hold the push button at the rock bottom of the device for 10 seconds.
- HOW DO I ADD A NEW WIRELESS CLIENT AND PC IF I HAVE FORGOTTEN MY WI-FI NAME (SSID) OR WI-FI PASSWORD?
– for each PC that must hook up with the router wirelessly, you’ll have to make sure you use the right Wi-Fi Name (SSID) and Wi-Fi password.
– Use the web-based interface (as described in question 1 above) to see or choose your wireless settings.
– As well as make sure you write down these settings so that you can enter them for each wirelessly connected PC. The back of this document features a neighborhood to record this important information.
- WHY CAN’T I GET AN INTERNET CONNECTION?
– For ADSL users, please contact your ISP to make sure the service has been enabled/connected by your ISP and that your ISP username and password are correct.
- WHY CAN’T I REGISTER MY DEVICES WITH MYDLINK?
– Hence if you experience issues registering this router with your mydlink account, try performing a hard reset by using an unfolded paper clip to press and hold the reset button as well as 10 seconds while the router is powered on. This may be necessary if you bought an open box or resold unit.