D-Link Wifi Router

D-Link Wifi Router

D-Link Wifi Router – D-link wifi routers could be configured through web logging in to the router using dlinkrouter.local. This is the default D-link router login LAN protocol address that takes you to the web configuration screen from where the users can monitor the router’s wifi network as well as the wifi settings.

After initially purchasing the dlink wifi router, the first and foremost step is to setup the dlink router to configure the wireless settings from the web configuration screen also called as the web Graphical User Interface GUI of the dlink wifi routers. D-Link Wifi Router How to setup a Dlink wifi router? Step 1 – installation of the Dlink wifi router: In this step, you must connect the Dlink wifi router to hardware devices by setting up physical or wired connections for Dlink router setup.
  • Disconnect the modem from the power source by switching it off.
  • Unplug power adapter from the power switch to cut off power supply.
  • In case your modem uses a battery as a power back up, remove the batteries as well.
  • Taking an included Ethernet cable, establish the connection between the modem and D-link wifi router.
  • Attach the Ethernet cable to the WAN port of both devices.
  • Further, establish the connection between the computer and the D-link wifi router using an Ethernet cable.
  • For wired connection setup, link computer and router for dlink router setup adjoin the Ethernet cable at the LAN ports.
  • For wirelessly connecting the computer to dlink wifi router, use the default wireless network settings or Web Protected Setup.
  • Resume the power supply to the modem.
  • Switch on the modem and wait till it starts.
  •  The LED light should light up.
  • Also, fix the d-link wifi router to the power source.
  • Turn on the D-link wifi router by pressing the Power ON/OFF button.
  • Let the router start and the LED light be stable.
Step 2 – D-link router setup and configuration:
  • Access a preferred web browser window on your computer connected to the D-link router (wired or wirelessly).
  • Navigate to D-Link router login default web address entering it on the browser’s address bar.
  • Type and Enter dlinkrouter.local into the address bar for web GUI access.
  • Dlinkrouter.local login directs the D-Link wifi router’s login page.
  • At the login page, enter the dlink router default password along with username for dlink login.
  • Type and enter the D-Link router default login username as Admin.
  • Also, leave the dlink router default password field blank as no credentials are required by default.
  • You are directed to the D-Link router’s web configuration page.
  • On first time dlinkrouter.local login, the d-link router Setup Wizard auto-launches.
  • D-link router setup wizard allows automatic dlink router setup followed by configuration of the wireless settings. 
  • Setup wizard would detect the wireless internet connection type.
  • Get going with the instructions onscreen by setup wizard to complete the configuration of the wireless settings. 
  • When prompt appears, create a new wireless network name SSID and Network Key for securing your dlink router’s wifi.
  • Save the configured settings to assign them on your dlink wifi router
  • The d-link router setup gets completed.
D-link router setup To check the configuration – Run an Internet connectivity test which shows if the D-link router has been connected to the wireless Internet or not. Following  dlink router setup, manage and control D-link wifi router from Web configuration /GUI screen through login dlinkrouter.local to configure and access various settings. D-Link router login – via dlinkrouter.local D-link router login requires a web browser and a computer to access the Dlink router’s web GUI or configuration interface. Also, the computer should be wired or wirelessly connected to the D-link router to access dlink web GUI. 
  • Access a preferred web browser window on your computer connected to the D-link router (wired or wirelessly).
  • Navigate to D-Link router login default web address entering it on the browser’s address bar.
  • Type and Enter dlinkrouter.local into the address bar for web GUI access.
  • Dlinkrouter.local login directs the D-Link wifi router’s login page.
  • At the login page, enter the dlink router default password along with username for dlink login.
  • Type and enter the D-Link router default login username as Admin.
  • Also, leave the dlink router default password field blank as no credentials are required by default.
  • You are directed to the D-Link router’s web configuration page.
Dlink router IP login This allows Logging to the D-link wifi router’s web GUI using the default gateway to login, that is, default IP address 192.168.0.1.
  • Access a preferred web browser window on your computer connected to the D-link router (wired or wirelessly).
  • Navigate to D-Link router login default web address entering it on the browser’s address bar.
  • Type and Enter default IP address 192.168.0.1 into the address bar for web GUI access.
  • If the default gateway does not allow dlink router login or any error arises, use Dlinkrouter.local as default web login.
  • Both the above logins direct the D-Link wifi router’s login page.
  • At the login page, enter the dlink router default password along with username for dlink login.
  • Type and enter the D-Link router default login username as Admin.
  • Also, leave the dlink router default password field blank as no credentials are required by default.
  • You are directed to the D-Link router’s web configuration page.
How to setup the D Link Router password? D-link router setup password
  • Access a preferred web browser window on your computer connected to the D-link router (wired or wirelessly).
  • Navigate to D-Link router login default web address entering it on the browser’s address bar.
  • Type and Enter dlinkrouter.local into the address bar for web GUI access.
  • Dlinkrouter.local login directs the D-Link wifi router’s login page.
  • At the login page, enter the dlink router default password along with username for dlink login.
  • Type and enter the D-Link router default login username as Admin.
  • Also, leave the dlink router default password filed blank as no credentials are required by default.
  • You are directed to the D-Link router’s web configuration page.
  • Access the Setup tab located on the top of the D-link’s web GUI.
  • Select the Wireless Settings option on the left hand side on GUI screen.
  • The default wireless settings page will be displayed on the screen.
  • Scroll down and click on the “Wireless Security Mode” link.
  • Create a new password for your D-link router wireless network access after deleting the previous security key. 
  • Confirm the new dlink router setup password used to connect to the dlink router’s Wi-Fi.
  • Click on the Save Settings on GUI.
D-link router setup password How to reset the D Link Router password? Dlink router password reset  Resetting of the dlink router password is done whenever the users tend to forget their dlink router login password which they changed from the default set values. As the forgotten password cannot be recovered, you would have to totally reset the dlink wifi router to its pre-set defaults.
  • Look for the Reset button on the back panel of your D-link wifi router.
  • With a sharp pointed object or usually a paper clip, push to hold down the tiny reset button on the D-link router.
  • Press the reset button for about 10 seconds.
  • Check till the power LED light on the d-link wifi router would start blinking.
  • Release the button after 10 seconds.
  • The D-link wifi router would automatically reboot as the reset completes.
  • On completing the reboot, the WAN status LED stops to blink.
The D-link router password reset gets completed and set to default settings previously set on the router. How to update Dlink router’s firmware? Dlink firmware update
  • Access a preferred web browser window on your computer connected to the D-link router (wired or wirelessly).
  • Navigate to D-Link router login default web address entering it on the browser’s address bar.
  • Type and Enter dlinkrouter.local into the address bar for web GUI access.
  • Dlinkrouter.local login directs the D-Link wifi router’s login page.
  • At the login page, enter the dlink router default password along with username for dlink login.
  • Type and enter the D-Link router default login username as Admin.
  • Also, leave the dlink router default password field blank as no credentials are required by default.
  • You are directed to the D-Link router’s web configuration page.
  • Select advanced option on configuration or settings page.
  • Click on the administration tab.
  • Choose the Dlink firmware update option (name may vary as router update from model to model). 
  • The dlink router would enable checking for any new firmware updates available.
  •  If the latest firmware update is available, a prompt message might appear asking to download the recent file. 
  • To allow automatic firmware update, click on the download option.
  • The firmware file would be downloaded as well automatically uploaded on dlink router.
  • The dlink router reboots as the firmware update continues.
  •  The router would restart once the firmware upgrade is complete.
Dlink firmware update The D-link firmware update is done in jiffy. It is always mandatory to keep the router updated to the recent version whenever it is available.